Your Home for Phoenix AC & Heating Repair and Maintenance



heating air conditioning and ventilation repair

So, why a website called HVAC Repair Phoenix?  Well, if you live in Phoenix, you know how extremely hot our summers can be and that air conditioning is nearly an absolute necessity! But, then you also probably know that the winters do get cold and crisp enough where heating is essential as well.  And no matter what time of year, when the cooling and heating system in your home isn’t working it needs to be repaired.  That’s when it’s important for you to know about Phoenix air conditioning repair and fixing your heating unit as well.  And if you need help with those repairs, then finding a qualified Phoenix heating and air conditioning contractor is just as important as well.

Birth of a Consumer Website about Heating and Cooling Your Home

We all know we need heating and cooling options.  And you know that when the temperature goes up in your house you either turn on the refrigeration or you lower the temperature setting to bring about a quick cooling of your home.  And when it’s cold outside, you turn to your heating system to raise the temperature by a few degrees in order to take the chill out of the air.

But, what if you go to turn the unit on and nothing happens?  Would you know why?  Would you know how to fix the problem? Do you even know if you have a heat pump or furnace, air conditioner or swamp evaporative cooler?

Do you know where the circuit breaker is?  Would you even recognize the sump pumps or air handler? Or know anything more than there’s a unit that sits outside your home, makes a lot of noise, and blows hot air out of its top?

Don’t feel bad.  Most homeowners know less about their heating and cooling systems than any other major component of their homes.  Hopefully you change your air filter each month and know how to use your thermostat, but really, how much more than that do you know about your home’s system?

Oh yeah, what does “HVAC” mean?  Well, that is an industry term for heating, ventilation, and air conditioning system.  And those in the business are known as HVAC Mechanical Contractors and service providers.

Now, if you are reading this website you probably have a problem with your air conditioner or heater, or maybe even need to have it replaced.  However, the fact that you know very little about how your air conditioner or heater works is exactly why you could very likely get over charged for repairs or maintenance and you will almost certainly pay too much for a new central air conditioning/heating system.

That is why I put together this website.  I’ve purchased a couple of heater and air conditioning units in my time and have needed service repair on a few occasions.  As a result, I did a great deal of research on the subject.  In addition, I have a relative who is a technician and service expert.  Through that study and in the course of talking with my family member, I’ve learned quite a bit about heating and cooling equipment and I also know exactly how business owners will take advantage of their customers to increase profits.

The Goal of This Site

My goal now is to educate consumers and stop the rampant bad business practices going on in this industry.  And PLEASE, do not trust the Better Business Bureau to regulate local Phoenix Heating and Cooling Contractors to protect you.

The BBB is a private organization who makes its money from the businesses it supposedly regulates by collecting annual fees from them.  Can you say conflict of interest?

So, how can you protect yourself when you need heating and cooling work done?  Well, the best way is thru education and then you need someone you can trust to recommend the best contractors in the area.  You see, since I’ve done all the investigation for myself, I can now recommend the best Phoenix hvac repair contractor based on my own experience and insider knowledge… thanks to my nephew.

This website, HVAC repair Phoenix, will help you make an informed decision as well as help you understand the terminology used in this industry.  We will look at the “real” regulating bodies such as ASHRAE and ACCA as well as the actual government entities that control and license heating and cooling companies.  In addition to any required permits in the Phoenix city code for the work being done.

We will also look at the top heating and air conditioning manufactures like Trane, Carrier, Lennox, Rheem, Goodman, and learn about the recommended best HVAC brands.  We will take a look at energy efficiency and SEER ratings as well as a gas furnaces AFUE rating and explain what it all means. residential air conditioner

We will look at indoor air quality control including electronic air cleaners, humidifiers, ventilation and much more.

In addition to addressing the functioning of your HVAC unit, I also want to give information about ways you can save money on heating and cooling costs.  One of my favorites which happens to be, a Phoenix energy audit.

You see, there are a lot of things you need to know and you can be blindsided by a company who understands most homeowners have no idea about these things and will go about educating you to their way of thinking…and take a lot of your money in the process!

We’re here to help when you have Phoenix air conditioning repair and Heating repair service needs

Yep, HVAC Repair Phoenix is your one source for all things heating and cooling. So if you are a resident in the Valley of the Sun and need Phoenix air conditioning repair or heating services, please spend a few minutes exploring our site, we are here to help!


Phoenix Air Conditioning Repair – Getting Ready for Summer


Phoenix AC repairman


Phoenix air conditioning repair companies know that the key to enjoying the summer is being able to retreat into your cool home when the heat becomes too much. With temperatures reaching over 110 degrees in the summertime, Phoenix is the kind of place where a properly functioning air conditioner is essential.

To help you get through these hot summer months, is offering these tips for ac repair in the Vally of the Sun.

High temperatures will be here before you know it, so take a few minutes to learn how to spot potential trouble with your air conditioning unit, how to keep it running properly and, if the need arises, find a reliable air conditioner technician.
Since heating and cooling represents a large seasonal expense, it is worth the time and effort to make sure that everything is working correctly.  In fact, according to one report, electricity to power air conditioners represents 16% of all electricity used. In warmer places, air conditioner energy usage can make up 70% of monthly electric bills. Obviously, it makes sense to get your unit functioning properly.

AC Maintenance Tips and Tricks

As mentioned above, keeping your home cooling unit functioning properly can save you time and money. A few simple maintenance tasks can help the system that cools your home running smoothly. Take the time to perform these tasks now to be ready for the upcoming heat wave.

  • Removing the cover from the outdoor condensing unit of your home’s system is the first step to starting the unit up after the winter. Repair companies in Phoenix often receive calls about a system failing to cool a home only to find that the cover is still on or else something is blocking the condenser. Without the ability to draw air into the system to cool, an air conditioner simply cannot function.
  • Changing filters at the start of the season will also help the unit work at its optimum level. Dirty filters can restrict airflow and even cause blockages that can freeze up the internal evaporator.
  • Starting the unit before hot days arrive is a great way to make sure everything is working properly. If you wait until the summer months arrive and then discover a problem, you may be waiting for some time to get a technician to look at your machine. In addition the cost for ac repair may be more as it may be an emergency call when a Phoenix ac repairman may have to visit during off business hours.  Taking the time to check up on your unit now will make sure you are ready for the sweltering Phoenix summer.

Warning Signs of AC Repair Needs

Small problems with your residential cooling unit might be easy to ignore. However, if left unchecked, some of the following warning signs could lead to serious issues. If you’re experiencing any of these problems, you’ll want to contact a repair specialist today.

The most common sign that something is wrong with your HVAC  or AC unit is a reduction in cooling performance. If the unit is running around the clock but your home is not getting cool, there is probably a blockage or mechanical problem that needs to be addressed.

If your system turns on and off frequently and seemingly at random, you may have an electrical problem. Check circuit breakers and fuses to see if the unit is somehow malfunctioning. It is best to seek a professional if you suspect an electrical problem with your cooling unit.

If your system displays a warning that it is low on coolant, you may have a Freon leak on your hands. Check the exterior and interior parts of the system for puddles of refrigerant. Leaking water or ice forming on the unit are also signs that something is not quite right.

What To Expect When Working with an Service Technician

When you hire a repairman to look at your unit, it pays to have an understanding of how the system works. Don’t be afraid to ask questions and ask for alternative solutions.

Many problems with an air cooling unit are simply caused by the need for regular maintenance. A technician usually does not charge huge fees for cleaning the system. However, if certain components have failed, expect to pay for both the technician’s time and ac replacement parts.

On rare occasions, technicians may suggest replacing the entire system. This is especially true in older homes where the cooling system may be obsolete. Many older units might have problems that can’t be fixed with replacement parts and in some cases it is actually better to replace the entire system.  This is especially true when a replacement will be more efficient and cost effective by saving money on home cooling costs.

Technicians may also recommend professional cleaning and tune-up services. These services are normally completed in one to two hours and are definitely worth considering. If you want to get the most out of your unit, regular professional maintenance is the best way.

Finding A Trustworthy Phoenix AC Technician

In looking for an AC repair service, you might find a huge list of firms in the phone book or online. Unfortunately, not all Phoenix repair companies have your best interests in mind.

How do you determine which one is best?

One way is by investigating the company’s professional certifications. Air conditioning repairmen should be licensed and certified. The EPA Certification and HVAC Excellence are two industry certifications that validate a company’s experience and dedication to professionalism.

Professional companies will also have brand-name training certifications that demonstrate their ability to work on your specific brand of air conditioner.  Companies should also be bonded and insured.

You’re online research will likely reveal customer reviews as well.  Many free sites such as Yelp and the Yellowpages Online show customer reviews that you can read through to learn about what customers thought of that company’s professionalism, honesty, integrity, etc.  That feedback in many cases helps you in finding a reliable service company or organization.

When selecting a potential air conditioning repair company in Phoenix, it is also important to think ahead. Does the company have technicians on call for sudden emergencies? What level of response time do they guarantee? Will they always send the same technician who is familiar with your system?

These are good questions to ask up front.

Stay Cool

Air conditioners do more than just make us comfortable. Air conditioning systems have improved the health in the United States population. They have prolonged the lives of those who suffer from heart disease and respiratory problems.

Lack of a good air conditioning system can even be dangerous. Heat stroke and other serious medical issues can result from overheating especially for homeowners in the Valley of the Sun. The elderly need to be especially careful during hot summer nights.  Pets are also at risk when an AC unit stops working properly.  It’s because of this that having a working reliable air conditioner can make a huge difference and even save lives.

By following these simple tips you can make sure your home is ready for the upcoming summer temperatures. Now is the time to make sure your ac unit is functioning properly and if not, take care of Phoenix air conditioning repair work needed so that your cooling system is ready to go this summer.


Phoenix Heating Contractors-Find the Right One for Your Heat Repair Needs



Phoenix heating repair service technician
As a Phoenix homeowner, you are constantly looking for the best way to improve your homes. Like many residents who own their own homes, you’ve probably tried your hand in doing most of the improvements. And while you’ve probably been successful on many occasions, there are times that you would need to find an expert to do the job for you.

The heating system of your house is a very important feature that keeps the cold away during winter or occasional rainy Phoenix monsoons.
Maintaining this feature in your home can be a bit overwhelming for you if HVAC repair is not necessarily your area of expertise. This is
why you should look for a reliable repairman to do that for you. However, finding the best Phoenix heating contractors can be a tough job
especially since there are a lot of them in the city.

So how can you make the right choice?

Here are a few tips that you can take into consideration when choosing a trustworthy repairman to maintain your home heating system:

Five Tips On How To Find The Best Phoenix Heating Contractors?

1. Research Is Key

Make sure that you do a thorough review on the list of heating contractors in your area. Don’t immediately go for the first one that you see on the yellow pages. Since you can search just about anything online in today’s high-tech society, it’s helpful if you use this tool to look for repairmen. This will be your key to finding the most reliable Phoenix heating contractors in your vicinity.

2. Years Of Experience

One you’ve narrowed down your list to your top contractors, try to see how long they’ve been in the business. This will give you a look at how well the business is thriving. More years in business usually means that they’ve been constantly called on for heating repairs to homes and offices. You’ll want to make sure that you are going for the best in the business so that you can get your money’s worth.

3. Check for References

When searching for a Phoenix heating repair contractor, make sure and check for references.  Being a member of the BBB or Better Business Bureau isn’t always a sign of quality work with integrity.  The web has a number of places you can go to check on reviews of potential HVAC repair technicians and more.  You can see what reviews are given at a site called Yelp for example…

4. Interview Your Choices

Try to get in touch with the Phoenix heating contractors that you have listed as potential heating service providers. This will be your time to gauge if they can do the work for you and if they are flexible, especially when you are working on a schedule or budget. This will also be a good opportunity to ask them about fees and other policies that they have in the business. It is best to lay all the cards on the table so that you can have the answers to your questions up front before any heating repair work is started. Doing this will help you decide which one to choose from your list.

5. Choosing And Scheduling Maintenance For Your Home

After the selection process, you can go ahead and choose the best Phoenix heating contractors for your needs. Make sure that you give them the specifics when it comes to what you need them to do. It would also be best to have them inspect your heating system so that you can meet them before the job. This will also help create a professional relationship with your contractors.

You can get the best when it comes to hiring contractors or technicians for home improvements and repairs. Just make sure that you put your needs first so that you won’t have any regrets in the future due to things not being done the way you want them. Finding the most reliable Phoenix heating contractors can be easy if you apply these essential tips.

Air Conditioner Power Consumption Facts

air conditioner power consumptionDid you know that when it comes to air conditioner power consumption, approximately one sixth of the United States’ total electricity that gets produced goes to air conditioning buildings? It was because of that fact that in January of 2006, the U.S. Department of Energy raised the minimum energy efficiency rating for air conditioners.

The new increased energy efficiency ratings are useful for everyone since they help with air pollution as well as reduce business and home energy costs.

What is the Efficiency Level of Your Air Conditioner Power Consumption?

Having said that, do you know how efficient your ac unit is?

One way you can easily find it out is through learning your cooling unit’s seasonal energy efficiency ratio, (SEER), measurement.  The SEER is a measurement used for setting a basic standard to machines that are friendly to the environment. It rates an air conditioner on the basis of the amount of energy it can effectively use. If the SEER number given to the air conditioner is high, then it goes then that corresponds with the energy efficiency rating of the unit.

Since the concerns about the environment have increased, the amount of the SEER on cooling units has also gone up. For example, in 1992 the minimum SEER standard was 10.  The new law passed in January 2006 has helped increase an air conditioners efficiency by increasing the minimum SEER to 13.

The rise in the SEER from 10 to 13 indicates that the efficiency of a particular air conditioner has improved approximately 30 percent more.  However, the downside to having an ac unit designated with a higher SEER would mean that its price and the installation costs would also go up. But this does not really seem to affect most homeowners or business people.  The presumption is that a higher initial investment would ultimately be cost effective by in the long run, and they would be able to save on their energy costs this way.

If the first fact, that one sixth of the United States’ electricity goes in air conditioning, impresses you or causes you to take notice, you would be all the more pleased to know this tidbit of information.  The Department of Energy assumes that by the year 2030, the energy and SEER laws will be revised once again. The estimated savings of these efficiency rating changes are that they would actually provide enough electricity for 26 million homes for an entire year!

What Can You Do About Your Air Conditioning Energy Usage to Save Money on Home Energy Costs?

So the best way you can save energy is to bring home a good quality air conditioner. From there, after proper installation is complete, then the most vital thing is to regularly maintain the cooling unit of your machine.

You can ensure a maximum efficiency of your conditioner if you change the filters and verify the functioning of the machine from time to time.  Checking your cooling unit at least two times a year to ensure it is in good working condition is a start.  Attending to any HVAC repair needs as soon as possible will also help to maximize the efficiency of your air conditioner power consumption.

Phoenix Energy Audit – The Results Are In!

So as I mentioned on a the HVAC Talk Page of HVAC Repair Phoenix,  I talked about the Phoenix Energy Audit I had done and the repair work that resulted from it in an effort to cut down on energy costs.  A great deal of work done to help improve the energy efficiency of my home.  That work included adding some insulation to the attic, sealing and blowing out air ducts, putting in a new blower unit to match the energy efficiency of the compressor, addition of a new register in one of the bedrooms…plus a couple of other things.

Phoenix energy efficiency savingsWell, it’s been over a month and now it’s time to report on the results.

ARE YOU READY!!!  (Sorry, I’m just a little excited…well, and nervous too!  :0))

So, the temperature has been changed first off.  The temperature was set at a somewhat miserable yet bearable 82 degrees.  Now, of course I don’t want to look a gift horse in the mouth.  That temperature is better that being outside in the Phoenix heat under the Arizona sun.  However, compare it to what our setting is now and…let’s just say the comparison was like going from a warm over into the freezer.

Currently we are sitting at a very comfortable 78 degrees… and I do mean VERY COMFORTABLE.  The air is blowing and the funny thing is that it could actually be heard blowing through vents.  In fact, I had to stop for a moment when I first heard it to figure out what the noise was.  🙂  (I admit I had to laugh at that.)

And it is cool air.   There is a noticeable difference over the last month and even the dogs are noticing the difference because they don’t pant like they use to.

Now admittedly, the next test was a little scary, but it was time to see the energy bill and find out what the differences were.  While opening that bill created a little nervousness and tension, finally seeing it brought a HUGE smile to my face.

The kilowatt hours over the course of the month were actually down compared to last year.  (Just to clear up any questions, I couldn’t compare the bill to last month because the outside temperatures were vastly different…like 85 degrees last month in comparison to 95 degrees this month.)  However, my bill does show last year’s numbers and that is how I know that the Phoenix energy audit made a HUGE positive impact.

As mentioned above, this month the temperature outside was 95 degrees.  Last year the temperature was 2 degrees warmer.  That difference is minimal.  However for those who may still be skeptical or need a little more convincing, there were 28 days in the billing cycle this year and 30 in the cycle last year.  2,339 kWH were used this month and 3,126 kWH were used this month last year.  That’s a difference of 83.53 kWH per day this month as compared to 104.2 kWH per day this month last year.  Even if you added in two extra days into this month’s bill based on the daily kWH amount from last year…the totals are still lower.

Now, while these numbers might not prove everything out 100% that the Phoenix energy audit and subsequent HVAC repairs to improve home energy efficiency, saves me money on air conditioning and electric costs, that do confirm one thing.  I’m not paying more in cooling costs and yet I am much more comfortable in my home.  I mean seriously, 82 down to 78 degrees.  I’m not sweating indoors anymore.

And based on that, I don’t think anyone can argue the energy savings with that.  And because of these results, I don’t think anyone can argue the value of a home energy assessment either.

So while it’s still hot as Hades outside, take advantage of a Phoenix energy audit on your home to lower your heating and cooling costs and save some money.


Troubleshooting a Gas Furnace – Tips to Troubleshoot Your Gas Furnace

troubleshooting a gas furnaceTroubleshooting a gas furnace may become your priority when it comes to resolving heating problems because your air conditioning unit’s function isn’t the only problem than can arise.  Even in Phoenix, during those dry winter nights you know that heating is just as much of a requirement as the air conditioning is in the summer.  I came across a great article to help give you information regarding gas furnace troubleshooting.

t contains a ton of valuable information about gas furnace problems and, for those of us…”typical” homeowners, it’s easy to read and easy to understand.  You can read it by clicking on ==> Gas Furnace Troubleshooting.

So if you’re interested in learning some specific details to troubleshooting a gas furnace, check out the link above.  I think you’ll be amazed at the number of things you can do to help maintain and even perform a little repair on your gas furnace is not working.

To get more HVAC Repair tips click on

When a Phoenix HVAC repair technician breaks the unpleasant news that it’s time for a new unit, the first thing to do…after you take a big breath realizing a large expenditure is necessary; is start learning about the options and costs of a new unit.  In a post titled “Recommended Best HVAC Brands,” the best recommended brands were listed and a general price comparison covered.  But there is another issue you’ll want to know about when it comes to buying a heating, ventilation, and air conditioning unit.  That’s it’s energy efficiency rating.

I requested the assistance of a friend of mine in the business to assist with this piece of the puzzle.

The energy efficiency ratings are commonly referred to as the AFUE and SEER ratings.  Here are some definitions and descriptions of how those ratings will help you determine the effectiveness of that unit to heat and cool your home.

SEER AND EER Rating Definitions

The Seasonal Energy Efficiency Ratio is a measure of the cooling efficiency of your air conditioner or heat pump. The higher the SEER number the better the system is at converting electricity into cooling your home.

Energy Efficiency Ratio EER Room air conditioners generally range from 5,500 Btu per hour to 14,000 Btu per hour. EER is calculated by dividing the cooling capacity in Btu/h by a chiller’s or room air conditioners power input in watts. The higher the EER, the more efficient the unit is at converting electricity into cooling your home.

SEER is used with central air conditioners and EER is used with room air conditioners. For new central systems, SEER ratings above 13 or more are generally considered high-efficiency units. SEER (seasonal energy efficiency ratio) and IPLV (integrated part-load value) are similar to EER, but weigh performance only during the cooling season.

COP or Coefficient of Performance is the heating capacity (in Btu/h) at standard heating conditions divided by its electrical input (also in Btu/h).

The HSPF Heating Seasonal Performance Factor is a measure of the heating efficiency of a heat pump. The higher the HSPF number the better the heat pump converts electricity to heat for heating your home. Heating Seasonal Performance Factor or HSPF and a higher number is better. HSPF is a measure of a heat pump’s energy efficiency over one heating season. Heat pump industry minimum is HSPF 7.7 for Heat Pumps.

SEER is the HVAC industry term for the efficiency of an air conditioning or heat pump (in the cooling mode) and SEER stands for Seasonal Energy Efficiency Ratio. The seasonal energy efficiency ratio is the amount of cooling that a heat pump (or air conditioner) delivers per watt of electricity used to power the heat pump. SEER is an acronym for Seasonal Energy Efficiency Ratio, and measures the cooling efficiency of an air conditioner. The higher the SEER, the greater the energy efficiency for the air conditioner or heat pumps. SEER ratings are determined in a laboratory where an exact set of indoor and outdoor conditions are specified by the US Department of Energy. Because each piece of cooling equipment is evaluated using the exact same conditions, the SEER rating can be used in comparing the performance of equipment from different air conditioning and heating manufacturers. The government uses the same test requirements for other energy ratings such as AFUE and HSPF.

AFUE or Annual Fuel Utilization Efficiency – AFUE tells you how efficiently the furnace converts fuel (gas or oil) into heat. An AFUE of 80% means that 80% of the fuel is used to heat your home while 20% is wasted. AFUE is limited in that it only refers to the unit’s fuel usage and not its electrical consumption.

Furnaces and air conditioners both come in energy efficient models. Annual Fuel Utilization Efficiency (AFUE) ratings apply to furnaces and are a direct measure of the furnaces fuel efficiency. AFUE ratings of up to 96.7 is the most efficient furnace in the industry.

It is important to understand efficiency ratings especially when you are shopping for a new air conditioner, heat pump, or gas furnace. The more efficient the system the lower your utility bills will be. All AFUE, SEER, EER, and HSPF ratings derived from standard tests which are issued by the government and come for industry professional organizations.

As provided by Richard at
This explanation should now help you to understand the information provided by your hvac repair Phoenix technician when determining what new unit you will purchase.

Here at HVAC Repair Phoenix, we don’t want you spending any more of your hard earned money than necessary and thought you could get something out of this info…hope it helps!

When a hvac unit gets some age on it there is pretty good chance you may need to add Freon to keep it cooling properly.
Over time, small leaks can occur in your system and you start to lose Freon. At first, this loss just makes the unit work harder and will raise your energy bills and put added stress on your unit’s compressor which uses the refrigerant to help cool the motor.

Eventually the unit will no longer cool the home and you realize you need to call a service company to come check it out.
I made such a call. Thing is though, I contacted a couple of companies to for this purpose. One outfit I called said they were going to charge $185 per pound of Freon and would not tell me how many pounds I might need.

Now, what I’ve learned is, while it is impossible to give an exact number when a system is low, service contractors still know for sure how much the system originally held and give an estimate as to how low the charge might be by the pressures on their refrigerant gauges.
One thing you definitely want to remember. When a company tells you they need to add Freon, make sure you watch them weigh it in. Most guys will just hook up a jug of r-22 and make up whatever amount they want!

If you need Freon, make sure you do this!

Make sure they weigh the bottle before they attach it to your system as well as after they have added the refrigerant. You will be shocked at how many service technicians do not even have a set of scales on their trucks!!

There is no way to know how much Freon was added without a scale. Many will tell you that they can tell by the pressures on their gauges but that is a flat out lie. If you do not want to call out another company then at least lend the guy your bathroom scale so you do not get overcharged and then call the office immediately and complain… It could get you a discount!

And remember, very few ac systems hold more than 10 pounds of Freon. Most average around six pounds or so. If a tech says you need five or six pounds then you can assume the system is just about empty and you have a pretty significant leak.

If he does not recommend a leak search then make sure you have him note on the ticket that if the refrigerant leaks out again within a 60 day period, the amount billed to you will go towards the cost of a leak search and repair.

Important!  Please remember, the number one thing to consider when looking for the best hvac brands is not so much the brand but who will actually be installing it!!!

Every licensed contractor who installs heating and cooling equipment will typically have a specific brand that they recommend.  Unbeknownst to many homeowners, the brand they are recommending is usually determined by what dealer gives them the best deal…. in other words, the lowest price on the hvac unit.  Think of the lowest bidder HVAC brands

Many contractors would argue that Trane is the best equipment as far as quality goes.  In fact, they would argue that no other brand is better.  As a result, if I were to say that American Standard was as good as Trane, would they argue that point?  Yea, most probably would.

However, American Standard actually owns the Trane brand name and both pieces of equipment are identical except for the way the cabinets look.  American Standard kept the Trane name because of its brand awareness.  And of course you will pay extra for that name!  So DON’T!

Then you have brands like Carrier.  They claim to be the largest manufacturer of heating and air conditioning units in the world, and probably are.  But, most of that equipment is for commercial use.  Carrier generally has terrible customer service when it comes to contractors working with dealers.  And, the equipment is not easy to work on or install compared to other brands so you will pay more.  Carrier also owns the Bryant name.

Then you have Rheem and Rudd, again, the same owners and these folks just want to go against industry standard and make the installer of the equipment pull his hair out trying to figure out the low voltage wiring specifics because they are not industry standard… again, you pay more.

I personally think that most equipment, at least what I am mentioning here, is very comparable in quality and it is more important that it be installed correctly than what name is on it.  NOTE:  There are some brands that are lower in quality so I would stick to the names I’ve mentioned here.

One brand in paticular that works well, is easy to install and also has the best pricing comes from the Goodman Manufacturing outfit.  This unit could be known as Janitrol, Goodman or even Kenmore.  When the salesman is in your house, ask him or her if they can get Goodman products.  I have a Goodman in my home, it’s been there for 15 years now and when I replace it I will install another Goodman!

As the Goodman slogan goes: Dare to Compare!

By the way, if you are interested in who owns whom, here is an interesting site to check out:  Who owns Who.

We here at HVAC Repair Phoenix, hope this information has been helpful to you in learning about the best HVAC brands.

When I was a new home owner, admittedly I use to take the operation of the hvac unit for granted.  My only thoughts were to turn on the air conditioning in the summer when I got hot.  And turn up the heat in the winter when I got cold.

how your hvac system worksWhen either of those functions stopped working, my only recourse was to call for professional help.  I quickly learned that with the summer heat here in Phoenix, that gets to be a costly service when that help is needed on a consistent basis.

Through these service calls, I discovered that doing some basic maintenance and minor repairs on my own has helped save me quite a bit of money.  It’s also what I would recommend to help you cut down your service cost.  But before taking on that do-it-yourself type of task, it’s helpful to know how a hvac system works.  To learn that, here are the hvac, heating and cooling system basics.

How your HVAC Systems works 101

Every system used to control the climate in your home has three basic components.  They are: a warm or cooled air source, a way to distribute the air that’s been heated or cooled to each room in your home, and a way to control or regulate the system which typically is the thermostat.  When put together, the warm air source, such as your furnace, and cool air source, such as the air conditioner, typically uses the same air ducts to distribute the air and thermostat to regulate the temperature.  Any of these components of your hvac system could be the culprit if it stops working.

A common principle is put into play when it comes to the heating and air conditioning on your system.  That principle is that heat always moves from a warm object to a cooler one, much like the manner in which flowing water travels from a higher level to lower level.  In short, heat is put into the air by the furnace in order to warm your home and heat is removed from the air by your air conditioner so as to cool your home.  Simple right?

Some form of fuel is burned by all hvac units be it electricity for the air conditioner or gas or fuel oil for the heater though sometimes even the heater will use electricity.  If a heat pump is used, it is powered by electricity and will both heat and cool air.  It will pull the heat from the air inside your home during the summer, and it pulls the heat from the outside air to warm the home during the winter.

So when you turn your furnace on, fuel is consumed to power that source.  Whether it’s electricity, gas, or oil, it’s the burning of that fuel that produces the heat driving it to the living areas of your home via wires, pipes, or air ducts.  Then that heat is blown out through heating panels, radiators, or registers.

Electrical power is used to cool a gas in its liquid state when an air conditioner is turned on.  By making contact with the cooling coil, the warm air within your home is cooled and that air is distributed via ducts and registers to each room.

That in short is how your hvac system works…from HVAC Repair Phoenix.

Take a look at this video for basics about how a hvac system works…